FMUSER FU-1000C Economical 1KW FM Transmitter with RDS Encoder

FEATURES

Price (USD): 2599
Qty (PCS): 1
Shipping (USD): 0
Total (USD): 2599
Shipping Method: DHL, FedEx, UPS, EMS, By Sea, By Air
Payment: TT(Bank Transfer), Western Union, Paypal, Payoneer

This is the package of FU-1000C 1000 watt FM transmitter with a RDS encoder, you may transmit high quality signals and display your information in words via the RDS encoder. Contact us and place your order now!

RF Part
Modulation					Frequency Modulation
Frequency Stabilization Method					PLL Phase-locked loop
Nominal Transmission Frequency					87 MHz - 108 MHz (other frequencies can be customized)
Frequency Deviation					± 75 Hz
The Frequency Step Value					50 kHz
The Output Impedance					50 Ω
RF Output Connector					L29-K or other specified connectors
The Output RF Power					0 -1000 W continuously adjustable
The Output Power Deviation					± 10 W
RF efficiency					> 75%
Pilot Frequency Deviation					± 0.1 Hz
Harmonic Radiation Suppression					< -70 dB
Internal Residual Wave Radiation					< -70 dB
High-Temporal Harmonic Radiation					< -65 dB
Parasitic Modulation Noise					< -50 dB

Audio Part
Audio Input Interface					XLR / USB / RCA
Audio Input Level					< 15 dBV
Sign Noise Ratio					≥ 70 dB (1 kHz, 100% modulation)
Stereo Separation					≥ 60 dB (L → R, R → L)
Distortion					≤ 0.02% (30 Hz - 15000 Hz, 100% modulation)
Frequency Response					50 - 15000 Hz
Audio Preload					0 μs / 50 μs / 75 μs optional
Left And Right Channel Level Difference					≤0.05 dB (100% modulation)

General Part
Chassis Size					2U (length 530 mm × width 340 mm × height 100 mm)
Chassis Size					2U (length 20.8-inch × width 13.3-inch × height 4 inch)
Machine Weight					10 kg
Machine Weight					22 lbs
Heat Dissipation					Mode: Air-cooling
Chassis Standard					19 inches
External Control Interface					RS232
The Protection Mode					high temperature and high VSWR protection supported
Relative Humidity					< 95%
Altitude Height					< 4500 M
Power Supply Voltage					100 VAC - 240 VAC / 50 Hz
Run Ambient Temperature					-10 ° C - + 45 ° C
Maximum Power					Consumption: 1500 W

Type	Parameter	Value	Condition
General	Supply voltage	12 V DC stabilized
	Supply current	280 mA
	Signal connectors	unbalanced BNC
	Data connectors	1x USB (port 1), 1x Ethernet (port 2, 3, 4)
	Network protocols supported	HTTP, SNTP, TCP, UDP, DHCP, DNS, SNMP
	USB speed	software switchable 1200, 2400, 4800, 9600, 19200 bps
	USB Mode	1 stopbit, 8 data bits, no parity, (no flow control),ASCII or UECP (SPB 490)
	TA switching	software or external switch
	TA/EON1TA input	TTL with 10 kΩ pull-up, level or falling edge activated
	Program sets	2
	Program set switching	ASCII command, UECP command or external switch
	Program switch input	TTL with 10 kΩ pull-up, level controlled
	RDS Services supported	PI, PS, PTY, TP, AF, TA, DI, M/S, PIN, RT, RT+, TMC, EON, PTYN, ECC, LIC, TDC, IH, CT, ODA
RDS signal	Subcarrier frequency	57 kHz
	Bandwidth	± 2.4 kHz (50 dBc)
	Output level adjust	0.0 to 4.0 V p-p in 256 steps
	Phase shift adjust	Full range, in 9.5 deg. steps	stereo transmission
Audio/MPX/Pilot input	Recommended load impedance	< 10 kΩ	mono
	Recommended load impedance	< 2 kΩ	stereo MPX
	Recommended MPX voltage	1.3 - 8.0 V p-p
	Passthrough voltage gain	1 (0 dB)	2 Hz - 100 kHz
	Pilot tone level	min. 120 mV p-p
	- recommended FM deviation	6.8 kHz
	Pilot PLL capture range	8 Hz
	Stereo encoder pilot frequency required	19000 Hz ± 2 Hz	stereo transmission
Output	Output impedance	100 Ω
	Recommended load impedance	> 70 Ω, < 1 nF, no DC offset
	Max. output voltage (RDS + MPX)	9.0 V p-p
	Recommended RDS level	3 - 11 % of MPX

1 x FMUSER FU-1000C 1U 1000W FM Transmitter
1 x FMUSER RDS-A Encoder
1 x USB Cable
1 x BNC Cable
1 x 12V 2A Power supply

INQUIRY

Name

Phone

Country

Message

FMUSER INTERNATIONAL GROUP LIMITED.

We are always providing our customers with reliable products and considerate services.

If you would like to keep touch with us directly, please go to contact us