Industrial Insights

• Radio History of Chicago : How it Develops Since 1900s?

  Industrial Insights

  This is an overview to Chicago radio history, you'll learn from the AM and FM history of Chicago since 1900s to 1990s. Visit Now and learn more !

  by/

  4/8/24

  1885

• Discone Antenna 101 - All Your Concerns Answered in One Area

  Industrial Insights

  Broadcast Antenna

  Think what assists you inspect the air website traffic or tracking terminals successfully? It's the Discone Antenna. Currently, considering that you're below, we're thinking that you don't have much of a hint regarding this antenna whatsoever.

  by/

  4/8/24

  2988

• How To Bond Ground Rods With Exothermic Welding?

  Industrial Insights

  In this article, I will certainly reveal you just how to make use of a CADweld uni-shot to exothermically bond your ground poles. This method of bonding ground cables to your ground rods, avoids rust, and also high resistance links to your ground rods. 

  by/ Bond Ground Rods With Exothermic Welding

  4/8/24

  1807

• How to Build a Turnstile Antenna for Satellite Communication

  Industrial Insights

  Broadcast Antenna

  Right here are building and construction plans of a Turnstile antenna that I utilize for space communication on the 2 meter amateur radio band.

  by/ Build a Turnstile Antenna for Satellite Communication

  4/8/24

  2602

• CB Radio vs HAM vs Walkie Talkie vs GMRS

  Industrial Insights

  Allow it to be CB Radios, HAMS, Walkie talkies, or GMRS, they're great options for phones. Do you want to stay connected to your family and friends while the operator does not bill you any expenses? Well, these are the things you need to opt for.

  by/

  4/8/24

  2329

• How To Build A 2 Meter Vertical Antenna?

  Industrial Insights

  If the old vertical antenna had lost its radials as well as wasn't able to strike the numerous amateur radio repeaters around,  you will certainly need to develop a 2 meter 1/4 wave vertical antenna for the 146 mHz. amateur radio band. And here's the guide for you.

  by/ how to build a vertical antenna

  4/8/24

  2857

• How To Build A 2 Meter Antenna For Bicycle Mobile?

  Industrial Insights

  Probably the biggest problem with taking your HT biking is thinking of a suitable antenna on your bicycle. This is because the bike doesn't give much of a ground plane. Here are the plans for the antenna he explained in the post.

  by/ Build an Antenna for Bicycle Mobile

  4/8/24

  1731

• How To Construct a J-Pole Antenna for the 70cm Ham Band

  Industrial Insights

  Broadcast Antenna

  Here is a cost-effective J-pole antenna that is very easy to construct.In regarding a hrs time, as well as concerning $10 well worth of materials, you can have a wonderful executing omnidirectional j-pole antenna.

  by/ Construct a J-pole Antenna for Ham Radio

  4/8/24

  1869

• Develop a Phasing Harness for Piling Antennas

  Industrial Insights

  Broadcast Antenna

  Lately, at the workplace, I had the possibility (or requirement) to make a phasing harness for a two-bay antenna. However, I had trouble. I located online a few years back exactly how to do this for my certain antenna scenario, today the website was gone! So I had to figure it out on my very own. After lots of hours of checking out my (very poor) notes, I figured it out.

  by/

  4/8/24

  1658

• Just How to DIY an NVIS Antenna AKA Cloud Burner Antenna Utilizing a Mag Mount

  Industrial Insights

  Broadcast Antenna

  Part of being a ham radio driver is to give communications in times of emergency situations. With the upcoming Ohio NVIS Antenna Day, I chose to look into NVIS antennas. NVIS antennas, additionally referred to as Near Event Vertical Skywave antennas have a high angle of radiation. Something on the order of 60 degrees, to directly to 90 degrees. Unlike UHF and VHF signals, which normally have a 50-mile range with a yagi antenna up high, and also NVIS antenna is made for interaction in the 75-- 500-mile variety. Occasionally an NVIS antenna is referred to as a "cloud heater" since it routes a lot of its radiation extra upward than a regular antenna.

  by/

  4/8/24

  1709

• Do It Yourself Your Own Equipment Shelf with an Absence Table - LackRack

  Industrial Insights

  Recently I needed a 19″ equipment rack. But being cheap, I decided to build one. While searching the Internet, I found what is called a LackRack, which uses IKEA‘s Lack Table. However further reading revealed a couple of things that I thought were lacking in the original design of the LackRack.

  by/

  4/8/24

  1708

• Just How to Mount Devices into a 19 Inch Shelf

  Industrial Insights

  Since almost all 19'' equipment racks use 10-32 screws in their side rails, get two of them and put two 10-32 nuts on the screw, and jam them together. Then clamp the whole thing in a vise.

  by/

  4/8/24

  2333

• How to DIY a Shortened 20 thru 40 Meter Vertical for POTA

  Industrial Insights

  There is something interesting about doing a POTA activation where you trek in with all your gear in a pack and also trigger a park running QRP power.

  by/

  4/8/24

  2292

• How to Build a DIY 2 Meter J-pole Antenna

  Industrial Insights

  Broadcast Antenna

  If you are looking for a low-cost, as well as simple to build antenna, the J-pole antenna is a great one! In regarding a hrs time, as well as about $15 worth of products, you can have a wonderful performing omnidirectional j-pole antenna.

  by/ DIY J pole antenna

  4/8/24

  3137

• What is Broadcasting and How it Works? - FMUSER

  Industrial Insights

  What is broadcasting and why should you care? Here is the complete guide about broadcasting from FMUSER, including what it is and how it works. Keep exploring!

  by/

  4/8/24

  2551

• A Brief Intro to Broadcast Production Technology - FMUSER

  Industrial Insights

  What is broadcast production technology and why you should care? Here is the complete info about what is broadcast production technology and some basic types of it. Keep exploring!

  by/

  4/8/24

  2255

• RF Filter in Radio Broadcasting

  Industrial Insights

  In radio communication, the RF filter is a very important electronic equipment. In radio signals transmission, there will always be bands we don't need, such as some unnecessary spurious signals; or maybe for some special reasons, we don't need a certain range of frequency in the radio signals. At this time, we need to filter out unwanted frequency bands through RF filters. So what kind of electronic equipment is the RF filter and why is it so important? This share is to answer this question.

  by/ What is RF Filter

  4/8/24

  3368

• DIY an FM Radio Dipole Antenna | FMUSER BROADCAST

  Industrial Insights

  The FM dipole antenna is the simplest and most extensive type of antenna, so it's easy for anyone to make their own one, which only needs some simple materials. a DIY FM dipole antenna is a practical and low-cost choice if your radio needs a temporary antenna. So how to DIY an FM dipole antenna? The article will tell you.

  by/ FM Antenna DIY

  4/8/24

  4604

• How to Find the Unused Frequency for FM Radio Transmitters?

  FM Transmission

  Industrial Insights

  Broadcast Transmitter

  FM radio transmitters are one of the easiest and most affordable ways to listen to your mobile device's music. But for a rookie, it may be a little difficult to find a frequency free of interference. If you're troubling in finding an unused FM frequency, this share will be useful for you.

  by/ Find Unused FM Frequency

  4/8/24

  8266

• How to Make a Printed Circuit Borad? | PCB Manufacturing Process

  Industrial Insights

  PCB, also known as printed circuit board, is made of different non-conductive materials for physical support and connection of surface mounted socket components. But what is the function of printed circuit board? How is printed circuit board made? Read the following content for more useful information.

  by/ How to Make a PCB Board

  4/8/24

  3513